Kitchen Remodeling

After the designs have been approved, we will begin the work of remodeling the kitchen.

Based on the project, the following things will be done in the stage:

Deconstruction

Your project might need your kitchen to be demolished first. In that case, you will need to tear down your existing walls and floors and strip down your kitchen to its bare minimum.

We will take care to avoid the plumbing and electrical system unless we are looking to change that as well.

We will take care that the debris is kept away from other parts of your home. We will remove it safely after the deconstruction work is done.

Rough-In Work Including Framing and Plumbing

The next step is the rough-in work, including any framing and plumbing. This step is focused on the walls or what goes inside them. In simpler remodels it might just involve moving the frame in the walls around a new center island.

On the other hand, in large remodeling projects, you might have to move plumbing fixtures or add square footage to the space by pouring new concrete for an expansion.

Initial Inspection

After the rough-in work is done, it’s time to schedule your ‘rough-in’ inspection. We will be calling the City office of Bellevue and scheduling the first inspection. This might involve paying a small fee.

Based on the initial inspection, they might suggest changes. You will need to get incorporate them into the plan. Our team will handle it all.

After the revised plan (if required) is approved, we will move to the next step.

Finishing the Walls

Once the plan is approved, it will be time to finish the walls. You will need to hang, tape, and finish the drywall according to the project plan. You might need to get drywall for the countertop bar or another section for the kitchen.

We often put a coat of primer on the drywall as it seals the facing paper and protects it against scuff and scrapes when installing other items.

Installing the Doors and Windows

After the drywall is done, we will install doors or windows. If the layout of the kitchen is the same as before, then you will not have to deal with this step. In that case, you will need to seal with the existing cracks.

If you are in the need to add new doors or windows, we first insulate them. This will help you save on energy costs. Unsealed kitchen doors and windows will make the space uncomfortable and also cost hundreds of dollars in heating and cooling bills.

At this stage, we will also install the trims which will make the cabinet installation more precise, and avoid gaps.

Installing Cabinets

Next, we will be installing the cabinets and plumbing fixtures. If required, we will be also changing the position of the sinks, fitting the faucets, and setting up hot and cold water lines. In case your plumbing system has minor issues or simple upgrades to be made, we will deal with that as well.

Setting Up the New Appliances

We will also help you to install your new appliances. The positions would have been finalized during the design phase and this stage, and in this stage, the plan will be executed.

Some modern appliances will need specific electrical arrangements. We will ensure to get them in place before we install the appliances.

Flooring

At the last stage, we will work towards installing the new flooring. In some cases, especially while installing tile and wood flooring, we might handle it before we install the cabinets. In other cases, we will keep it for last.